Fadi EN12975 And SRCC Certificated Exquisite Pressuirzed Solar Collector For House Heating (25Tube)

Pressurized Solar collector .Competitive price and good quality .SRCC,Keymark .5-15 years warranty .24hours online service

Presurized solar collector details: Model: FD-SC-25

Pressurized solar collector working principle

1. The heat pipe series pressurized solar collector are always connected with existing heating supply device.

2. The selective coating on the inner Cover of the evacuated tubes converts solar energy into heat energy and transfers heat to the heat pipes by aluminium fins.

3. The liquid in the heat pipe changes into vapour which rises to the condenser.

4. The heat then passes through the heat exchanger and the vapour becomes liquid, returning to the base of the heat pipe.

5. The heat conducts to the heat transfer liquid (anti-freezing liquid or water) via a copper pipe.

6. This transference of heat into the liquid creates a continuous circulation as long as the collector is heated by the sun.

Pressurized solar collector specification1. Manifold (interior): 0.8mm thickness Red copper 2. Manifold (exterior): 2.0 mm thickness Aluminum alloy 3. Glass tube dimensions: 58mm x 1.800mm

4. Tube no: 25tube 5. Insulation layer: 45mm thickness glass firber /polyurethane layer 6. Heat preservation: 72-96hrs 7. Hail resistance: 25mm 8. Max pressure: 6 bar 9. Coating of vacuum tube: ss-c/cu 10. Frame: 2.0mm thickness Aluminum Alloy Pressurized solar collector applications1. Hotels, resorts, hospitals and hostels 2. Process industry, boiler feed, laundry and canteens 3. Agricultural sector, hatcheries and dairies 4. Process industry, Boiler feed, Laundry and canteens 5. Agricultural sector, hatcheries, and dairies 6. Swimming pool heating 7. In-process heating 8. Health clubs (Steam /Sauna)

Technical Data of presurized solar collector
Description	Pressurized solar collector
Numbers of tube(pcs)	25
Absorber area approx.(m2)	2.343
Hydraulic Connections	G3/4" male thread
Fluid volume(L)	1.3
Maximum operation pressure(Bar)	6
Test pressure(Bar)	9
Heat transfer fluid	Anti-freeze Fluid (Water-Glycol)
Max.working temp.	300C
hot water(L/Day)	250L
ΔT	35C (Radiation>=800w/m2.day)
Collector efficiency	76.4%
Medium	Pure water
Start-up Temperature of heat pipe	<=30C
warranty	5years

Pressurized solar collector material specification

Flow type	Heat pipe
Heat pipe material	0.6mm thcikness TU1 copper
Heat pipe size	Top: Ø14* 1mm;   Body: Ø8* 0.6mm
Tube diameter	φ58/1800mm
Solar vaccum glass tube	High boron-silicon
Coating of absorber on glass tube	Al-N-Al,Copper,Stainless steel
fins around heat pipe	single long Aluminum(1.68m)
Manifold pipe material	TP2 copper (Ø35x0.8mm)
Manifold casing material	Aluminum alloy (2.0mm)
Insulation material in manifold casing	Glass fiber
Thickness of insulation(mm)	45
Density of insulation (kg/m3)	90
Frame material	Aluminum alloy frame (2.0mm)
Sealing Materials	EPDM

Heat pipe technical data

Item	Measured value
Heat conduction coefficient	>99%
Axial heat transition auantity	0.93-2.49kw/cm²
Heat conduction speed	>200mm/s
Axial temperature difference	1-2centi-degree/m
Starting temperature	20centi-degree
Starting speed	2min
Working temperature range	-30centi-degree~300centi-degree
Resistance to high temperature	No deformation in 48hours under 250C high temp condition
Resistance to low temperature	-35C
Life	>10years

Fadi EN12975 And SRCC Certificated Exquisite Pressuirzed Solar Collector For House Heating (25Tube)