U.S.A Style High Quality Split Pressurized Solar Water Heater (200Liter)

Split pressurized solar water heater .Customized production .SRCC,Keymark .5years warranty .After sales solutions Split pressurized solar water heaterModel: FD-SP-200L Split pressurized solar water heater features1. The upright tank can make the water temperature to a high level. It can hot the water instantly. 2. The tank inside the building, the hot water loses less energy than the normal one .3. The pressurized solar water heater collector and the split solar water heater tank is separated, that makes the system combine with the building perfectly, which will reduce the sightseeing for the building and environment around .4. Back up with electric heater so that in the day without sunshine hot water can also be used.5. Can be combined with gas or electric heater6. Max. Pressure: 12bar; Operating Pressure: 6 bar7. It can be used for other function, such as warming Split presssurized solar water heater working principle 1. The collector absorbs solar energy and transmits it to the water tank through circulation .2. When the temperature of the collector reaches the set value, the controller starts the circulation pump automatically.3. The circulation pump makes heat-conducting liquid circulate automatically.4. The heat-conducting liquid transfers heat to water by lower heat exchanger in the water tank. 5. When the temperature difference between solar collector and tank doesn't reach the set value, the circulation pump will be shut automatically .6. In case the temperature of the water tank does not reach Tmax, Electric Heating Element will start to work automatically. Split pressurized solar water heater pump station component1. Operating screen 2. Manometer 3. Pump speed adjust switches 4. Temperature difference circulation pump 5. Flow rate indicator 6. Return circuit connector 7. Safety valve 8. Expansion vessel connector9. Return circuit connector 10. Wall mounting 11. Expansion vessel: 8L 12. Pressure resistance: 10 bar pressure for expansion vessel Separate pressurized solar water heater specification

Descripition	Split pressurized solar water heating system
Material of out manifold	0.55mm thickness color steel/ fluorine carbon steel
Material of inner tank	Food grade 1.5mm thickness SUS304 stainless steel
Tank insulating layer	50mm 45kg/m³ high-density polyurethane foamed
Inlet and outlet hole	Male G3/4
Max pressure	0.6 Mpa
Solar collector tube	3.3 Borosilicate glass with N/Al coating
Thickness of glass tube	1.6mm
Vacuum tube tightness	P≤0.005 Pa
Absorption	as=0.93-0.96 (AM1.5)
Emission ratio	εh=0.04-0.06 (80C±5C)
Idle sunning property parameters	Y=220~260m2.C/KW
Average heat loss coefficient	ULT=0.6~0.7W/(m2.C)
Bracket:	2.0mm thickness aluminum alloy
Welding:	Argon arc welding
Fastening pieces:	Made of stainless steel screw
Tank capacity	200L
Solar collector	1pcs  58x1800x20tube solar collector
Absorber area	1.875m²
Working station	SP116 pump station
Heat exchanger length	18m

Heat pipe technical data

Item	Measured value
Heat conduction coefficient	>99%
Axial heat transition auantity	0.93-2.49kw/cm²
Heat conduction speed	>200mm/s
Axial temperature difference	1-2centi-degree/m
Starting temperature	20centi-degree
Starting speed	2min
Working temperature range	30centi-degree~300centi-degree
Resistance to high temperature	No deformation in 48hours under 250C high temp condition
Resistance to low temperature	-35C
Life	>10years

U.S.A Style High Quality Split Pressurized Solar Water Heater (200Liter)